1000NGS/1000NG

Natural gas Generator Set

Main configuration and features:

•  Highly efficient gas engine.

•  AC synchronous alternator.

•  Gas safety train and gas protection device against leakage.

•  Cooling system suitable for ambient temperature up to 50℃.

•  Strict shop test for all gensets.

•  Industrial silencer with silencing ability of 12-20dB(A).

•  Advanced engine control system: ECI control system including: ignition system, detonation control system ,speed control system , protection system，air/fuel ratio control system and cylinder temp. 

•  With cooler and Temperature Control System to make sure the unit can work normally at 50℃ environment temperature. 

•  Independent electrical control cabinet for remote control.

•  Multi-functional control system with simple operation.

•  Data communication interfaces integrated into control system.

•  Monitoring battery voltage and charging automatically.

•  Use safe and efficient steam boiler of which efficiency up to 92% and service life up to 20 years.

[1]   Suppose the water return temperature from User is 60℃.

[2]   The data is calculated under the condition of no circulating steam, and the temperature of exhaust for the boiler is 210°C.The data is influenced by the installation process, application way and environment.

Special statement：

1、   The technical data are based on natural gas with a calorific value of 10 kWh/Nm³ and a methane no. > 90%

2、   The technical data indicated is based on standard conditions according to ISO8528/1, ISO3046/1 and BS5514/1

Rated adjustment is made under the condition complies with DIN ISO 3046/1. In rated output condition, the tolerance of gas consumption is 5%, and the tolerance of steam production is ±8%. 

[2]   The data is the max evaporation made of recycling remaining exhaust gas under the condition of  circulating steam.

[3]   The data is calculated under the condition of no circulating steam, and the temperature of water supplement for the boiler is 20°C.

Special statement：

1、The technical data is measured in standard conditions: Absolute atmospheric pressure：100kPa

      Ambient temperature：25°C Relative air humidity：30%

2、Rating adaptation at ambient conditions according to DIN ISO 3046/1.The tolerance for the specific fuel consumption is + 5 % at rated output.

3、The boiler is designed, produced and tested according to GB/T150.1-2011~GB/T150.4-2011 “Pressure Vessel” and GB/T151-2014 “Heat Exchanger”.

Dimension and weight above are just for standard  product and may be subject to change. As this document is used only for presale reference, take                           the specification supplied by Smart Action before ordering as final.

[3]   Emission values downstream of catalytic converter based on dry exhaust.

Standard conditions TA-LUFT: Air temperature: 0 °C, Atmospheric pressure absolute: 100 kPa。 

Alternator compliance withGB755, BS5000, VDE0530, NEMAMG1-22, IED34-1, CSA22.2 and AS1359 standard. 

In case of nominal mains voltage variations by ± 2%, an automatic voltage regulator (AVR) must be used.  

Genset performance data and manufacturing technology
Overload run-time at 1.1xSe(hour)			1		Telephone interference factor (TIF)			≤50
Steady-state voltage deviation			≤±1％		Telephone harmonious factor (THF)			≤2%，as perBS4999
Transient-state voltage deviation			-15％~20％		Manufacturing technology Special welded base frame, inner vibration isolators and design for whole lifting With high-class paint, endurable brightness as well resistance against abrasion and defacing Installation manual, operation and maintenance manual wiring program   Standards and certificate ISO3046，ISO8528 GB2820BS5000PT99, AS1359 IEC34ISO9001:2008 quality system certification
Voltage recovery time (s)			≤4
Voltage  fluctuation			1%
Steady-state frequency regulation			±0.5%
Transient -state frequency regulation			±5%
Frequency recovery time (s)			≤3
Steady-state frequency band			0.5%
Recovery time response (s)			0.5
AC alternator performance data				Efficient gas engine
Alternator brand	MECC			Engine brand			CNHTC
Motor type	ECO38 1L4A			Engine model			STEYR T12
Rated output power (kVA)	250			Engine type			6 cylinders inline, turbocharger with intercooler
Alternator efficiency	93.40%			Bore x stroke （mm）			126mm×155mm
Power factor	0.8			Displacement （L）			11.6
Wiring connection	D/Y			Compression ratio			11
Rotor insulation class	H级			Rated output power			235kW/1500rpm
Excitation method	Brush-less			Oil consumption max.			≤0.3 g/kW.hr
Voltage（V）	380/400/415/440			Ignition method			Electrically controlled single cylinder independent high-energy igni-
Rated speed（min-1）	1500			Fuel control mode			Lean combustion, closed loop control
Housing protection	IP23			Speed regulation mode			Electronic governor
Service
Oil level (ambient temperature is higher than minus 5°C/ ambient temperature is lower than minus 5°C)		API 15W-40 CF4  API 10W-30 CF4
Lubricating oil capacity (min./max.)						35 L / 37 L
Added fresh oil tank						N/A
Coolant capacity		5 L (Min. mixture cooling water circulation quantity LT) 40 L (Min. engine coolant circulation quantity)
Coolant type		50% softened water and 50% anti-freezing solution (ethylene glycol, with the concentration of the anti-freezing solution between 35%-68% )
Supply air temperature		10℃~45℃
installation room ventilation  (inlet air volume flow )		＞15000 m³/h

SAC-200 Control system

Programmable control system is adopted with touch screen display , and various functions, including: engine protection and control, paralleling between gensets or gensets and grid, as well as communication functions. etc.  

Main advantages

→ Premium gen-set controller for both single and multiple gensets operating in standby or parallel modes.

→ Support of complex applications for power production in data centres, hospitals, banks and also CHP applications.

→ Support of engines both with electronic unit – ECU and mechanical engines.

→ Complete control of the engine, alternator and controlled technology from one unit provides access to all measured data in a coherent and time corresponding way.

→ Wide range of communication interfaces allows smooth integration into local monitoring systems (BMS, etc.)

→ Internal built-in PLC interpreter allows you to configure customised logic to meet demanding customer requirements on your own without extra programming knowledge and in a fast way.

→ Convenient remote control and service  

Paints, Dimensions and Weights of the Genset —1000NGS

Dimensions are for reference only.

1000kW Natural gas Generator Set— Silent Type